Jump to content
ssimmons1958

x-plane X-Plane: Free TBM 900 v1.1.4 Update From X-Aviation

Recommended Posts

 

X-Plane: Free TBM 900 v1.1.4 Update From X-Aviation

 
 
 
 
 
 
TBM 900 v1.1.4 Free Update!
View this email in your browser
e402e0ea-2ff9-42e2-96e8-cab118e7be30.jpg

HotStart TBM 900 v1.1.4 Update!

Ready for download now...


Hello RedNeck,

X-Aviation and HotStart are proud to announce the release of the TBM 900 v1.1.4 update.



Here's what's changed in version 1.1.4:

  • Added HUD circuit breaker.
  • Deepened manipulators and fixed cabin pressure manipulator.
  • Fuel indicator lines were misrendered and showing too low to the actual tank state.
  • Fuel gauge lines should use a gradianted pattern, instead of a flat color.
  • Added GPU exhaust particle effect.
  • Added remap from X-Plane's TOGA_power to trigger our takeoff guidance and kill X-Plane's tendency to give full power as if we had A/THR.
  • Added propeller tip vortices at high power and high humidity.
  • Added FUEL SEL AUTO checklist item into the engine start checklist.
  • Removed superflous AUX BP AUTO checklist item from the after start checklist.
  • Implemented new airspeed and altitude tapes with better annunciator mode management.
  • Implemented custom VS tape.
  • Changed G1000 fuel units to gallons - should now show correct units in FPL fuel predictions.
  • Fixed broken AP/TRIMS disconnect and AP off buttons in XP11.30.
  • Switched to using tags for version IDs for more readable version strings.
  • Use XPLMNavRef to avoid airports with inconsistent ICAOs in the X-Plane nav database confusing us.
  • Implemented maximum climb torque and optimum cruise torque marks on the torque gauge.
  • Squashed more marching ants.
  • Added directly settable datarefs for all switches, so integration with external controllers and cockpits is simpler.
  • Added direct set commands for all toggle controls to simplify integration for cockpit builders.
  • Fixed broken alternate static port manipulator.
  • Implemented DIMMER light switch on the overhead.
  • Fixed missing approach pathways on ILS approaches.
  • Adjusted rear seats so armrests are touching.  Adjusted manipulators to reflect armrest changes.
  • Fixed Nav/Strobe lights to be closer to the real thing.
  • Chocks were sometimes misaligned. Added a vertical deflection dataref to align chocks to landing gear.
  • EDM should be using the GASC-computed cabin altitude, not true cabin altitude.
  • Bad fx_lin_multi field array could cause an assertion failure.
  • Obstacle database was broken because FAA had switched to HTTPs and we weren't expecting that.
  • XP11.30 reordered how the airport loading message is sent at start, leading to a double aircraft system init/deinit on aircraft reload via the Developer menu.
  • Indicated airspeed computation was affected by pitot covers, yielding broken behavior for engine driftdown in windy conditions.
  • Documented all custom switch datarefs + commands for cockpit builders. Can be found under Documentation/DataRefs+Commands.txt.
  • Cockpit manipulator on MFD keypad for digit 0 has incorrect command assigned
  • Fixed TerraMax license conflict causing TerraMax to sometimes deactivate momentarily.
  • Fixed misaligned LOC with runway centerline.
  • Added manual vertical realignment of GS transmitters with actual sim terrain elevation.



As always, thanks for purchasing from X-Aviation! We appreciate your business and look forward to serving you more in the future!

Blue Skies,
X-Aviation.com

 

SOURCE INFO

DEVELOPER POST LINK :  

NEWS SITE ARTICLE LINK :  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×